Get Our Free Newsletter Put Your Link Into Noahtec.com!Free Repairing Tips You Couldn't Get Elsewhere!Back To MainPage..
 
~TYPES OF WORKSHOP OFFERED~

  Introduction To Testing Basic Electronic Components
  Basic Practical Printer Troubleshooting and Repairing
  Basic Practical Monitor Troubleshooting and Repairing
  Advanced Practical Monitor Troubleshooting and Repairing

 



 
Refurbishing Flyback Transformer Course
And
LCD 
  Monitor Repair and Troubleshooting

Participants Reading Monitor Schematic Diagram


Upgrade your Flash Player to version 8 to view this video!
 
INTRODUCTION TO TESTING BASIC ELECTRONIC COMPONENTS 
 
Workshop Code: BEC01
Workshop Length: 3 days

INTRODUCTION
This workshop is tailored to individuals who are new in the field of electronics.
TARGET GROUP
The Introduction To Testing Basic Electronic Components Workshop is targeted at Technical College Students,
Technicians, Electronic Hobbyists and Computer Owners.
electronic workshop     electronic workshop     electronic workshop
WORKSHOP OBJECTIVES

At the end of the workshop, participants will be able to:
   · Know the safety precautions when troubleshooting electronic equipment.
   · Assemble a fluorescent lamp.
   · Understand ohm’s law and perform basic calculation.
   · Use a multimeter to measure voltage, current and resistance.
   · Differentiate between AC, DC voltage and circuit.
   · Remove and solder electronic components from and onto PCB board.
   · Identify and measure most of the basic electronic components.
   · Read semiconductor substitution manual book.
   · Build simple project kit.
   · Troubleshoot minor electronic circuit problem.
   · Prepare to undertake the Basic Practical Monitor Troubleshooting and Repairing Workshop.
PRE-REQUISITES
   
   · No prior knowledge required.
   · Able to understand simple Mathematics and English.
   · Have interest in electronics.
The workshop materials, lectures and lab exercises are in English. 
(Upon request, the lecturer can conduct in Mandarin and Bahasa Malaysia)



electronic workshop    electronic workshop    


BENEFITS OFFERED
   
UPON SIGNING UP FOR THE WORKSHOP, PARTICIPANTS ARE ELIGIBLE FOR:
   · Technical support on basic electronic components through mail, e-mail,fax or phone.
   · Discounts on electronic components, printers spare parts, technical books and testing equipment.
   · 10% discount for every monitor, UPS or printer sent to Noahtech for repair.
A PARTICIPANT WORKBOOK which contains:    
1. Explanation on safety measures.
2. Diagrammatic explanation on how to assemble a fluorescent lamp. 
3. Explanation on ohm’s law.
4. How to use a multimeter to check AC/DC voltage and current, and resistance.
5. Explanation on functions, recognition, calculation and checking basic electronic components such as
   a. Resistors g. Bridge Rectifier
   b. Capacitors h. Integrated Circuit (IC)
   c. Fuse i. Transistor—NPN/PNP 
   d. LED j. Field Effect Transistor (FET) - N-channel/P-channel 
   e. Diode k. Coils / Inductor
   f. Zenerdiode l. Transformer
      · How to read ECG semiconductor data book.
      · How to build a project kit.
      · Transistor data for 2SA, 2SB, 2SC, 2SD, 2SJ and 2SK.
      · CMOS IC HANDLING PRECAUTIONS.
      · Voltage Regulator 7800 and 7900 series specification.
      · Explanation on electronic components’ functions, symbol and recommended testing equipment to test them.
      · Chart of electronic components schematic symbols.
      · Resistor color code chart.
      · Capacitor code and conversion chart.
      · Suggested technical reference book.
      · Technical Terms (Glossary).
The workbook will be given when the workshop begins.

      

CERTIFICATE OF ATTENDANCE WILL BE AWARDED UPON COMPLETION OF THE WORKSHOP.
NOTE: FOR MORE INFORMATION, INQUIRIES AND REGISTRATION, PLEASE CONTACT: 
         603-6277 8522/3 FAX: 603-6277 8521 or email me at jestineyong(at)electronicrepairguide.com


Back To Top
   

BASIC PRACTICAL PRINTER TROUBLESHOOTING AND REPAIRING
 
 Workshop Code: BPPR
 Workshop Length: 2 day  

INTRODUCTION
This workshop is tailored to individuals who are new in the field of printer repairing. The workshop provides 
necessary knowledge required to understand basic principles of a printers. This is an introductory workshop
designed to provide and overview of troubleshooting and printer repairing concepts.

TARGET GROUP

The Basic Practical Printer Troubleshooting and Repairing Workshop is targeted at Technical College Students, 
Technicians, Electronic Hobbyists and Computer Owners.

WORKSHOP OBJECTIVES
At the end of the workshop, participants will be able to:
   · Know the safety precautions when troubleshooting printers.
   · Describe how a printer works.
   · Use computer and printer test print.
   · Identify each section in a printer.
   · Understand the functions in a printer.
   · Identify the error code.
   · Diagnose and begin a simple troubleshooting and repair.
   · Finding parts information and how to obtain them.

PRE-REQUISITES 
   · No prior knowledge required.
   · Able to understand simple English.
   · Have interest in electronics.
   The workshop materials, lectures and lab exercises are in English. 
(Upon request, the lecturer can conduct in Mandarin and Bahasa Malaysia)


 
BENEFITS OFFERED  
UPON SIGNING UP FOR THE WORKSHOP, PARTICIPANTS ARE ELIGIBLE FOR:
   · Technical support on printers through mail, e-mail, fax or phone.
   · Discounts on electronic components, printers spare parts, technical books and testing equipment.
   · 10% discount for every monitor, UPS or printer sent to Noahtech for repair.
· A PARTICIPANT WORKBOOK which contains: 
   · Explanation on safety measures.
   · Explanation on basic functions of Dot-matrix and Laser printer.
   · Basic error code in HP Laserjet printer.
   · Troubleshooting tips and repair.
   · Suggested technical reference books.
   · Technical Terms (Glossary).
The workbook will be given when the workshop begins. 

      
CERTIFICATE OF ATTENDANCE WILL BE AWARDED UPON COMPLETION OF THE WORKSHOP.
NOTE: FOR MORE INFORMATION, INQUIRIES AND REGISTRATION, PLEASE CONTACT: 
         603-6277 8522/3 FAX: 603-6277 8521 or email me at jestineyong(at)electronicrepairguide.com


Back To Top   



 
BASIC PRACTICAL MONITOR TROUBLESHOOTING AND REPAIRING
 
 Workshop Code: BPM01
 Workshop Length: 3 days  
 
INTRODUCTION
This workshop is tailored to individuals who are new in the field of monitor repairing. The workshop provides 
necessary knowledge required to understand basic electronic principles and to identify basic electronic 
components. This is an introductory workshop designed to provide an overview of troubleshooting and monitor 
repairing concepts.

TARGET GROUP
The Basic Practical Monitor Troubleshooting and Repairing Workshop is targeted at IT Managers, IT Engineers, 
IT Lecturers, Technicians, Technical College Students, Electronic Hobbyists, and Computer Owners.

monitor workshop    monitor workshop    monitor workshop          


WORKSHOP OBJECTIVES
At the end of the workshop, participants will be able to:
   · Use a Monitor Testing Program.
   · Know the safety precautions when troubleshooting monitors.
   · Describe how a monitor works.
   · Read a basic monitor schematic diagram.
   · Identify each section in a monitor.
   · Understand the functions of each section in a monitor.
   · Remove, install and test a Flyback Transformer.
   · Install a Monitor Blur Buster (MBB).
   · Check if colors and sync problems are due to a defective vga signal cable.
   · Perform basic voltage measurement in some critical test points within the monitor circuit.
   · Adjust internal preset (VR) to correct some simple display problem.
   · Diagnose and begin simple troubleshooting and repairing.
   · Prepare to undertake the Advanced Practical Monitor Troubleshooting and Repairing Workshop.

PRE-REQUISITES 
This workshop assumes that the participant has a minimum understanding of the following competencies:
   · Understand basic electronic terms and concepts
   · Identify and measure basic electronic components
   · Basic voltage measurement using multimeters
   · Working knowledge of at least 6 months in electronic repairing field
   · Completed the Introduction to Testing Basic Electronic Components Workshop.
The workshop materials, lectures and lab exercises are in English. 
(Upon request, the lecturer can conduct in Mandarin and Bahasa Malaysia)


 

monitor workshop   monitor workshop   


BENEFITS OFFERED   
UPON SIGNING UP FOR THE WORKSHOP, PARTICIPANTS ARE ELIGIBLE FOR:
   · Technical support on monitor through mail, e-mail, fax or phone.
   · Discounts on all electronic components, printers spare parts, technical books and testing equipment.
   · 10% discount for every monitor, UPS or printer sent to Noahtech for repair.
   · A free volume I and volume II repairing manual book.
   · A diskette containing monitor testing software.
A PARTICIPANT WORKBOOK which contains: 
   · Step by step on how to use a monitor testing program.
   · Explanation on safety procedures in monitor repairing.
   · Colours pictures that show the components of a monitor.
   · A basic monitor block diagram.
   · A monitor schematic diagram.
   · A VGA signal pin configuration and diagram.
   · Diagramatic explanation on how to check a flyback transformer, yoke coils, B+ coils and SMPS winding.
   · Diagramatic explanation on how to install a monitor blur buster.
   · Monitor board layout diagram where internal preset (VR) are located.
   · Question on monitor critical test point such as heater, G1, G2, and etc which is to be fill by participants.
   · Basic illustration of monitor problems and suggested solution.
   · Basic monitor repairing tips.
   · Suggested technical reference books.
   · Technical Terms (Glossary).
The workbook will be given when the workshop begins.

       
CERTIFICATE OF ATTENDANCE WILL BE AWARDED UPON COMPLETION OF THE WORKSHOP.
NOTE: FOR MORE INFORMATION, INQUIRIES AND REGISTRATION, PLEASE CONTACT: 
         603-6277 8522/3 FAX: 603-6277 8521 or email me at jestineyong(at)electronicrepairguide.com


Back To Top   
  


ADVANCED PRACTICAL MONITOR TROUBLESHOOTING AND REPAIRING
 
 Workshop Code: APM01
 Workshop Length: 3 days  
 
INTRODUCTION
This workshop is introduced to individuals to the opportunities and challenges of monitor repairing. Participants 
will see how monitor repairing can be challenging, but they will learn how to address these challenges by 
employing appropriate tools and testing equipments to troubleshoot monitors. Through demonstration and hands 
on practices, participants will know how to use the right tools and test equipments to diagnose a monitor. This 
is an advanced workshop designed to provide a full understanding in troubleshooting and repairing monitor .

TARGET GROUP
The Advanced Practical Monitor Troubleshooting and Repairing Workshop is targeted at IT Managers, IT 
Engineers, IT Lecturers, Technicians, Technical College Students, Electronic Hobbyists, and Computer Owners.

WORKSHOP OBJECTIVES
At the end of the workshop, participants will be able to:
   · Troubleshoot the Power Supply circuit.
   · Troubleshoot High Voltage Circuits.
   · Troubleshoot Horizontal Circuits.
   · Troubleshoot Vertical Circuits.
   · Troubleshoot Video (colour) Circuits.
   · Troubleshoot Cathode Ray Tube (CRT).
   · Troubleshoot Microprocessor and EEprom Circuit.
   · Troubleshoot Monitor Controls.
   · Use an oscilloscope to diagnose and repair monitor problem.
   · Use a Flyback Tester to check the monitor’s flyback, switch mode power transformer, B+ and yoke coil’s 
     winding.
   · Use capanalyser 88A (ESR meter) to check for electrolytic capacitor problem in a monitor.
   · Use high voltage probe for measuring the anode and focus voltage of a Flyback Transformer.
   · Use a Digital Capacitance meter to measure the internal capacitance of a flyback transformer.
   · Use an EEprom Programmer (Copier) to copy EEprom data of a monitor for troubleshooting purposes.
   · Use a CRT tester to check the condition of a picture tube.
   · Read the specification of a picture tube and find an equivalent tube for replacement purposes.
   · Use a light bulb to isolate monitor problem (power supply and B+ circuit problem).
   · Read Horizontal Output Transistor (HOT) and Field Effect Transistor (FET) specification and find a suitable 
     equivalent number.
   · Diagnose and repair most of the monitor problem covering from 9”, 14”, 15”, 17” up to 21” monitors and many more.

PRE-REQUISITES 
   · Working knowledge of at least 1 year in repairs of monitor, TV and CCTV.
   · Completed the Basic Practical Monitor Troubleshooting and Repairing Workshop.
   The workshop materials, lectures and lab exercises are in English. 
(Upon request, the lecturer can conduct in Mandarin and Bahasa Malaysia)

   

BENEFITS OFFERED 
UPON SIGNING UP FOR THE WORKSHOP, PARTICIPANTS ARE ELIGIBLE FOR:
   · Technical support on monitor through mail, e-mail, fax or phone.
   · Discounts on electronic components, printers spare parts, technical books and testing equipment.
   · 10% discount for every monitor, UPS or printer sent to Noahtech for repair.
   · A free volume I and volume II repairing manual book.
   · A diskette containing monitor testing software.
A PARTICIPANT WORKBOOK which contains: 
   · Overview of Computer Monitor Circuits
   · Explanation on safety measures.
   · Explanation on general and specialized test equipment.
   · Explanation on monitor circuits:
   a) Power supply e) Video (colour)
   b) High voltage f) Cathode Ray Tube (CRT)
   c) Horizontal g) Microprocessor and EEprom
   d) Vertical h) Monitor controls
       · How to use an oscilloscope to troubleshoot monitors.
       · How to use a light bulb to isolate power supply and B+ circuit problem.
       · A 17” digital monitor schematic diagram.
       · How to read HOT and FET specification and find a suitable equivalent number.
       · Typical components part number found in a modern monitor. 
       · Illustration of monitor problems and suggested solution.
       · Monitor repairing tips.
       · Suggested technical reference books.
       · Technical Terms (Glossary).
The workbook will be given when the workshop begins.

 electronic workshop 
CERTIFICATE OF ATTENDANCE WILL BE AWARDED UPON COMPLETION OF THE WORKSHOP.
NOTE: FOR MORE INFORMATION, INQUIRIES AND REGISTRATION, PLEASE CONTACT: 
         603-6277 8522/3 FAX: 603-6277 8521 or email me at jestineyong(at)electronicrepairguide.com
 
REFURBISHING FLYBACK TRANSFORMER COURSE
 
 Workshop Code: RFTC01
 Workshop Length: 1 day  
INTRODUCTION
This workshop is introduced to those who have completed the advanced Monitor Troubleshooting workshop.

TARGET GROUP
The Flyback Transformer Refurbishing Course is targeted at  IT Engineers, Technicians and Electronic Hobbyists.

WORKSHOP OBJECTIVES
At the end of the workshop, participants will be able to:
   · Refurbish 14" to 21 " flyback transformer
   · Learn how to repair 17" flyback and above with blurring (focus out) problem.
   · How to use a flyback transformer to made into monitor blur buster
   · Given original flyback transformer epoxy (original spec from the flyback manufacturer)
   ·
  
PRE-REQUISITES 
  
   · Completed the Advanced Practical Monitor Troubleshooting and Repairing Workshop.
   The workshop lectures and lab exercises are in English. 
(Upon request, the lecturer can conduct in Mandarin and Bahasa Malaysia)
 
LCD MONITOR TROUBLESHOOTING AND REPAIRING 
 
Workshop Code: LCDC01
Workshop Length: 3 days

INTRODUCTION

This workshop is tailored to individuals who are new in the field of monitor repairing. This is an introductory workshop designed to provide an overview of LCD Monitor troubleshooting and repairing concepts.


TARGET GROUP
The LCD Monitor Troubleshooting and Repairing Workshop is targeted at IT Managers, IT 
Engineers, IT Lecturers, Technicians, Technical College Students, Electronic Hobbyists, and Computer Owners.

WORKSHOP OBJECTIVES
At the end of the workshop, participants will be able to:
   · Troubleshoot the Power Supply circuit.
   · Troubleshoot Inverter Circuits.
   · Troubleshoot Lamps Circuits.
   · Troubleshoot Main board/scalar/a-d board
   · Troubleshoot Driver/Controller/Logic board.
   · Use an oscilloscope to diagnose and repair LCD Monitor problem.
   · Use a Flyback Tester to check the High voltage transformer and switch mode power transformer
   · Use capanalyser 88A (ESR meter) to check for electrolytic capacitor problem in a LCD monitor.
   · Use an EEprom Programmer (Copier) to copy EEprom data of a LCD monitor for troubleshooting purposes.
   · Read the specification of SMD code for resistor,capacitor, diode, transistor and IC.
   · Use a light bulb to isolate LCD Monitor problem (power supply and inverter circuit problem).
   · Diagnose and repair most of the LCD Monitor problem, use a SMD rework station and many more.

PRE-REQUISITES 
   · Completed the Introduction to Testing Basic Electronic Components Workshop.
   The workshop materials, lectures and lab exercises are in English. 
(Upon request, the lecturer can conduct in Mandarin and Bahasa Malaysia)

   

BENEFITS OFFERED 
UPON SIGNING UP FOR THE WORKSHOP, PARTICIPANTS ARE ELIGIBLE FOR:
   · Technical support on monitor through mail, e-mail, fax or phone.
   · Discounts on electronic components, printers spare parts, technical books and testing equipment.
   · 10% discount for every monitor, UPS or printer sent to Noahtech for repair.
   · A free volume I and volume II repairing manual book.
   · A diskette containing monitor testing software.
A PARTICIPANT WORKBOOK which contains: 
   · Overview of LCD Monitor Circuits
   · How to read block and schematic diagram of LCD Monitor.
   · Understand the functions of each section in LCD Monitor (power supply, inverter, lamps, main board, logic board and LCD panel)
   · Tools and Test Equipment for troubleshooting LCD Monitor
   · Understanding the codes of surface mount devices (resistor, capacitor, diodes, transistor and IC)
   · How to use a light bulb to isolate power supply and inverter circuit problem.
    The importance of schottky diode in LCD Monitor and how to test it.
   · Understand the function of start circuit in LCD Monitor and how to check it.
   · How to check the High voltage transformer in inverter board. 
   · Illustration of LCD Monitor problems and suggested solution.
   · How to check if the backlight is working or faulty.
   · How to diagnose if the inverter board is working or faulty.
   · How to check if the power or inverter is giving problem.
   · How to check the brightness and dimming circuit.
   · How to repair LCD Monitor with no power symptom.
   · How to repair LCD Monitor with dim display problem.
   · How to repair LCD Monitor with no OSD symptom.
   · How to repair LCD Monitor with vertical/horizontal line problem.
    How to repair LCD Monitor with white raster symptom and many more.

The workbook will be given when the workshop begins.
 
CERTIFICATE OF ATTENDANCE WILL BE AWARDED UPON COMPLETION OF THE WORKSHOP.
NOTE: FOR MORE INFORMATION, INQUIRIES AND REGISTRATION, PLEASE CONTACT: 
         603-6277 8522/3 FAX: 603-6277 8521 or email me at jestineyong(at)electronicrepairguide.com
 
Workshop fees

Type of Workshops Offered

Duration

Workshop Fees

 

Introduction To Testing Basic Electronic Components

 

3 days

RM1450.00

 

Basic Practical Printer Troubleshooting & Repairing

 

2 days

RM1450.00

 

Basic Monitor Troubleshooting & Repairing

 

3 days

RM1450.00

 

Refurbishing Flyback Transformer

 

1 Day

RM1500.00

 

Advanced Monitor Troubleshooting & Repairing

 

3 Days

RM2500.00

 

LCD Monitor Troubleshooting & Repairing

 

3 days

RM3800.00

 

Package 1: Introduction To Testing Basic Electronic Components + LCD Monitor Troubleshooting & Repairing

 

 

6 days (lesson)

5 days (practical training at Noahtech's Technical department)

RM5250.00

 

Package 2: Introduction To Testing Basic Electronic Components + Basic Monitor Troubleshooting & Repairing + Advanced Monitor Troubleshooting & Repairing

 

9 days (lesson)

5 days (practical training at Noahtech's Technical department)

RM5400.00

 

Package 3: Introduction To Testing Basic Electronic Components + Basic Monitor Troubleshooting & Repairing + Advanced Monitor Troubleshooting & Repairing + LCD Monitor Troubleshooting & Repairing

 

12 days (lesson)

10 days (practical training at Noahtech's Technical department)

RM9200.00

 

Package 4: Introduction To Testing Basic Electronic Components + Basic Practical Printer Troubleshooting and Repairing + Basic Monitor Troubleshooting & Repairing + Advanced Monitor Troubleshooting & Repairing + LCD Monitor Troubleshooting & Repairing

 

14 days (lesson)

12 days (practical training at Noahtech's Technical department)

RM10650.00

Note: Free Refurbish Flyback Transformer Course worth RM1500.00 for package 2,3 and 4
           Free "How To Determine Burnt Resistor E-book" worth RM150.00 for package 2,3 and 4
 
 
CERTIFICATE OF ATTENDANCE WILL BE AWARDED UPON COMPLETION OF THE WORKSHOP.
NOTE: FOR MORE INFORMATION, INQUIRIES AND REGISTRATION, PLEASE CONTACT: 
         603-6277 8522/3 FAX: 603-6277 8521 or email me at jestineyong(at)electronicrepairguide.com

Back To Top

Back to Workshop

 

products | newsletter | link to us | contact us | online security 
how to order | customer satisfactions | about us | tell a friend | home

Copyright @ Noahtech Computer Repairing & Services 1996-2007. 
All rights reserved